4.1: Remove the acrylic from the laser system and mask over the two portions of text as shown in Graphic 4.

4.2: Paint the center graphic white as shown in Graphic 5 and let completely dry.

4.3: Remove the tape mask from the upper text, spray blue and let completely dry.

4.4: Remove the tape mask from the lower text, spray red and let completely dry as shown in Graphic 6.

4.5: Remove the tape mask from the front of the acrylic. Done!

4.6: The finished reverse color fill acrylic sheet is shown in Graphic 7.

Tip: For a more finished appearance, glue felt to the back of the acrylic.

<Previous Page • Intro 1 2 3 4 5 • Next Page >

«Back to "How to"