2.1: Choose the color and weight fabric that you want to use for your pillow. For this project, we used medium weight blue synthetic suede which has a crisp texture and a short nap that is pleasing to the touch.

Note: We highly recommend the use of Universal’s downdraft honeycomb cutting table when cutting fabric. It is possible to cut fabric without the honeycomb table, but it is much harder to keep the material from bunching up, and some residue may be left behind on the fabric.

2.2: If you are using the honeycomb cutting table, apply transfer tape to the areas of the table not covered by the fabric and also cover the upper rear exhaust vent. This will increase vacuum hold down to better hold the fabric in place. Place the fabric on the table and smooth out any wrinkles as shown in Graphic 2. If you are not using the honeycomb cutting table, tape the fabric synthetic suede securely to the cutting table so that it cannot move and smooth out any wrinkles.

Note: You can purchase synthetic suede from most retail fabric stores. If you cannot find the material locally, you can purchase it online at www.fieldsfabrics.com.

<Previous Page • Intro 1 2 3 4 5 • Next Page >

«Back to "How to"