|
SYSTEM BENEFITS:
Wide Range of Platform Sizes – Choose the platform size that best fits your needs, from our smallest and most economical systems to our largest and most flexible systems.
Rapid Reconfiguration™ Capability (patented) – Lasers can be swapped between ULS systems in minutes by the user without tools to optimize production needs.
Single or Dual Laser Configurations in PLS and ILS Systems – Ability to easily upgrade power by adding a laser allows system to grow with your business.
Dual Engraving Beams on Same Item (patented – exclusive to SuperSpeed option for PLS and ILS) – Provides the fastest engraving throughput of any large field laser engraver and can be run up to 500 percent faster than a single beam laser system
Class 1 or Class 3R Safety Enclosed Systems – Designed for safe operation according to (CDRH) guidelines. No goggles, special licensing, special insurance, special training or exposure to unnecessary risks are associated with Class IV systems.
[ TOP ]
LASER BENEFITS:
ULS Manufactured CO2 Lasers – Air cooled, quick change ULS-manufactured lasers incorporate the latest patented technological innovations. Lasers can be easily removed by the user for upgrade or prompt factory servicing from ULS at the lowest recharge cost in the industry.
Lasers Designed Specifically for Engraving & Cutting – Lasers are manufactured by ULS and specifically tuned to provide the best cutting and engraving quality.
Pre-aligned Quick Change Lasers™ (patented) – Ability to move lasers from machine to machine within seconds by the user increases flexibility and productivity.
Cross Platform Laser Compatibility (patented) – Lasers can be interchanged between machines within seconds to give the best production advantage.
Power Range Availability (10-150 watts) – Get the exact amount of power you need for virtually any application.
Red Dot Laser Pointer – Projects a visible red laser dot that allows users to precisely position materials on the engraving table and preview exactly where the laser will fire. Standard on all lasers and platforms.
[ TOP ]
MECHANICAL BENEFITS:
Lightweight Moving Parts – Low inertia motion carriage design allows for incredibly quick raster engraving start/stop times and amazingly agile vector cutting. Also helps increase parts life while reducing maintenance.
Highly Modular Design – Provides users with quick and easy access to parts for upgrades or replacement in the field in just minutes using common hand tools; almost all procedures can be performed without factory servicing or a field technician.
Sealed, Self-Adjusting Bearings in Moving Parts – Easy-to-service motion system uses sealed precision bearings that require no lubrication, typically provide years of trouble-free service life and are easy to replace by the user at a cost of about $100.
Drive Motors – Both micro-stepper and servomotors are used across the ULS product line for accurate, efficient and reliable performance.
Oversized Kevlar Reinforced Drive Belts – Durable stretch-free belts provide long life without the need for maintenance or adjustments.
Enclosed (shielded) Optics with Quick Release Covers – Easily removable enclosed focusing lens and mirror assembly ensures that optics remain cleaner for a longer time and simplifies periodic inspection, cleaning and maintenance.
Motorized Table – Variable speed allows for precise focus adjustments (fast speed for setup, slow speed for fine focus adjustments) and provides for quick machine setup.
High Precision Auto Focus (PLS and ILS platforms) – High precision optical auto focus offers quick and precise focusing.
Focus Can Be Set For Any Position on Engraving Field – Ability to focus on an object regardless of where it is positioned on the engraving table allows for quick, easy and precise machine setup.
Calibrated Focus Tool – Each focus tool is individually calibrated to match its companion lens to provide the most accurate manual focusing possible on critical jobs.
Inch or Metric Rulers on Work Area – Allows for quick and precise positioning of materials on the engraving table.
Large Viewing Window above Work Area – Gives users excellent visibility of the work area to monitor work progress.
Easy Access Back Cover – The hinged back cover gives users easy access to Universal's Quick Change Laser Cartridge™, CPU and power supply for upgrades or replacement.
[ TOP ]
PRINT DRIVER AND COMPUTER INTERFACE BENEFITS:
Windows XP Print Driver for Professional Series, Industrial Series and VersaLASER Series – Windows XP print drivers are written by ULS – in-house software engineers specifically for the needs of laser engraving and cutting.
Exclusive Laser Interface+ Print Driver™ – Allows for automatic and manual control of system settings for a short learning curve and time-saving advantages.
Flash Upgradeable Firmware – Quick and easy flash firmware software updates expand the potential for machine upgrades after purchase and greatly extend the useful life of the equipment.
On Screen (Computer) Simulation of Engraving/Cutting Jobs (VersaLASER) – Ability to preview a job before it is actually run assures proper setup.
Re-locatable Origin – Ability to reset the home position origin to work with your graphic software or your personal preferences allows for custom setups with 0.001" accuracy.
Multiple Language Support – Users can select the language they are comfortable with for ease of operation.
PPI (Pulses Per Inch) Proportional Pulse Control (patented) – User-definable spacing between laser pulses can be optimized for cut penetration or smoothness of cut and allows for better engraving or cutting quality (even on materials like wood or acrylic).
Load and Save Settings – Allows users to save and store material/processing settings for future use to speed set up of frequently-run jobs.
3D Mode – Creates dramatic, highly contoured 3D engravings by adjusting laser power to produce a grayscale effect in which dark areas of an image engrave deeply and light areas engrave less deeply.
Rubber Stamp Mode – Factory pre-set at optimum settings for stamp production with a variety of materials allows for production of high quality, high detail rubber stamps.
Combined Raster (engraving) and Vector (cutting) in Same Job – Only one print job needs to be sent to produce combined raster and vector results which speeds job setup and production.
Multiple Powers and Speeds within the Same Job – Ability to incorporate different cutting and engraving power and speed settings within the same job increases throughput and versatility.
Tuning and High Speed Image Enhancements – Allows fine tuning of images, including laser and material interaction through the driver, to produce better quality engraving on critical jobs.
Cross-Platform Driver Similarity – Simplifies using different ULS machines as any user can run each machine with minimal adjustments.
[ TOP ]
ACCESSORY BENEFITS:
Rotary Attachment – Accommodates most cylindrical items and allows very fast engraving, vector marking or cutting. Holds part on both ends, accommodates taper, can be run in high speed raster mode with lighter objects and also runs in vector mode. Rotates beyond 360 degrees in order to assure full wrap-around engraving. Wine bottles, coffee mugs and geometric shapes can be rotated.
Coaxial Air Assist with Optics Protection (Non-Computer Controlled) – High PSI (pressure) design with user adjustable pressure regulator keeps optics clean and improves engraving and cutting of some materials. Coaxial design optimizes effectiveness.
Coaxial Air Assist with Optics Protection (computer controlled – PLS and ILS ) – Computer-controlled high pressure design allows high or low PSI plus the addition of another gas provides ultimate protection of optics and ultimate control of air/gas to improve cutting/engraving quality of some materials. Works on single lens or dual head; coaxial design optimizes effectiveness.
High Power Density Focusing Optics(HPDFO)™– Patented optics achieves the effects of a higher power laser to dramatically improve the resolution for applications requiring extremely fine detail, such as high resolution photos and small font sizes.
Air Assist Compressor – Provides clean, dry, oil-free air at high pressure to the air assist components. Also helps extend the life of the laser system optics. Requires selection of an air dryer option.
Air Dryer – Removes moisture from air assist which can damage laser optics. Allows air assist to operate even in humid environments.
After-Installation Addition of Accessories – The user can add accessories after purchasing equipment when needed in the field (except air assist and HPDFO on VersaLASER).
Dual Head (Professional Series) – Allows simultaneous engraving or cutting of two items (same artwork) at the same time and can increase throughput (up to two times) of engraving or cutting (depending on available laser power and application).
Cutting Table – Provides both a cutting surface and vacuum hold-down. Removes smoke from below cut, reducing potential of damage to bottom surface of material and improves cutting quality. Attached rulers assist in accurate part positioning. Greatly reduces need to clean work table.
Integrated Air Cleaner/Cart (VersaLASER VLS2.30 and VLS3.50 only) – VersaLASER sits atop attractive air cleaner/cart and locks in place. Air cleaner is controlled through USB port and activated only when jobs are in process. Locking casters provide moving convenience.
Cart (VersaLASER Desktop only) – VersaLASER sits atop attractive cart and locks in place. Large drawers allow for maximum storage. Locking casters provide moving convenience.
[ TOP ]
WARRANTY & SUPPORT BENEFITS:
Up to Five (5) Year Warranty (Platforms & CO2 Lasers) – Each system includes comprehensive warranty coverage, including optics and belts, for long term predictable cost and top performance. Warranty extensions can be added to any laser or platform.
[ TOP ]
TRAINING & SYSTEM CONFIGURATION TOOLS:
User Manual – Comprehensive user manual is easy to read and understand. Provides quick proficiency with laser system and a tool for training new users. Includes suggested settings for processing many materials.
Factory Applications Lab – Universal's Applications Lab provides free applications and materials testing. ULS applications engineers will provide information on optimum power and speed settings, time required to process the application and a video of the material test procedure upon request. Turnaround time for sample applications and material testing typically runs three to five days.
[ TOP ]
POWER BENEFITS:
10 Watts – Low power level for light engraving and thin material cutting.
25-35 Watts – Entry-level production power level for standard engraving and cutting operations at moderate speed and high speed low power engraving. Not recommended for thick cutting or dual head applications.
40-60 Watts – Medium production power level for deeper, high speed engraving and thick cutting operations at moderate speed.
65-80 Watts – High production power level provides increased throughput, deep engraving and cutting.
85-120 Watts – Very high production power level that is ideal for heavy cutting and deep, higher throughput engraving. Ideal for use with dual head. In a dual laser system (X2-SuperSpeed only), turning one laser off is helpful for precision engraving of very low power materials.
120-150 Watts – High power for heavy cutting and deep, high throughput engraving. In systems equipped with dual lasers, it is helpful to turn one laser off for precision engraving of materials requiring low power.
[ TOP ]
PATENTS:
Laser Patents
Patent # 5,661,746 Free-Space Gas Slab Laser
Patent # 5,754,575 Free-Space Gas Slab Laser
Patent # 5,867,517 Integrated Gas Laser RF Feed and Fill Apparatus and Method
Patent # 5,881,087 Gas Laser Tube Design
Patent # 5,894,493 Free-Space Gas Slab Laser
Patent # 5,901,167 Air Cooled Gas Laser
Patent # 5,982,803 Free-Space Gas Slab Laser
Patent # 6,181,719 Gas Laser RF Power Source Apparatus and Method
Patent # 6,983,001 Laser with Heat Transfer System
Platform Patents
Patent # 5,051,558 Laser Material Processing Apparatus and Method
Patent # 6,313,433 Laser Material Processing System with Multiple Laser Sources Apparatus and Method
Patent # 6,342,687 Portable Laser System with Portable or Stationary Fume Evacuation
Patent # 6,423,925 Apparatus and Method for Combining Multiple Laser Beams in Laser Material Processing Systems
Patent # 6,424,670 Interchangeable Laser Sources and Platforms
Patent # 7,060,934 High Power Density Focusing Optics™
Design Patents
Design Patent # D517,474 Laser Cabinet Design for VersaLASER
[ TOP ]
|
