Coaxial Air Assist with Optics Protection
(Non-Computer Controlled):

Purpose:
Suppresses flaming and assists with optics protection.

Advantage:
The Non-Computer Controlled Air Assist provides the same lens and mirror protection and flame suppression (using a nozzle) as the more sophisticated Computer Controlled Air Assist but with a single gas and no computer control. Turning the compressor pump or gas supply on lets air or gas flow. Turning the compressor pump or gas supply off stops the air or gas flow.

Compatibility:
All M, V & X laser platforms. Requires an external air supply. The External Compressor Unit for Air Assist is highly recommended. Any air or gas supply not provided by ULS must have a regulator set to no higher than 60 PSI. Filtered air from a compressor using oil is not acceptable. Air must be oil free, dried and filtered.

Installation:
Must be factory installed.

Common Uses:
Higher power engraving or cutting and any rubber engraving.