|
Design:
Free-standing unit with integrated cart, motorized Z-axis, auto focus, X-Y beam positioning system with RACER™ motion technology, self-aligning spring loaded sealed bearings, stationary processing table, shielded optics, flash upgradable electronics, job complete indicator and system status indicator.
Laser Source:
Diode pumped 50 watt, Q-Switched,
Nd: YAG Laser.
Laser Control:
Laser control through Windows printer driver.
Work Area:
32" x 18" (812 x 457mm)
Table Size:
37" x 23" (940 x 584mm) Max. Part Size: 37" wide by 23" deep x 9" thick (940 x 584 x 228mm).
Computer Interface:
Parallel port standard. USB and ethernet optional. Compatible with Windows 2000/XP.
Memory Buffer:
Intelligent buffer with automatic data compression stores up to 99 files with all settings; files are addressable and repeatable in any order and may be deleted after completion to free memory; buffer can be switched to a single file mode.
Display Panel:
LCD display shows current file name, laser settings, engraving speed, run time, files loaded into memory buffer, setup and diagnostic menus.
[ Return to Products ]
|
|
Operating Modes:
Optimized raster or vector processing or combined vector/raster processing.
Dimensions:
Laser system: 39” high x 44” wide x 37.5” deep (990 x 1117 x 952mm). Laser power unit: 33” high x 23” wide x 24” deep (838 x 584 x 609mm).
Weight:
System: Approximately 350 pounds (158kg). Laser power unit: Approximately 250 pounds (113kg).
Safety:
Class 1 interlocked safety enclosure.
Facility Requirements
Electrical:
Single phase 220 VAC, 15 amp, 50/60 Hz
Exhaust:
Outside exhaust required. Two 4” (102mm) connections requiring 300 CFM total (150 at each connection) air flow and high pressure blower capable of 6 inches of water (425m3/hr at 1.5kPa).
Cooling:
Water-cooled with built-in chiller. No external connections required.
|
|
